Removing and Attaching the Terminal Covers
Remove the covers for the following terminals in order to access them.
• | HD/SD SDI and GENLOCK/TC terminals* | • HD/SD COMPONENT OUT, USB and HDMI |
• | W(headphone), AV and DC IN terminals | OUT terminals |
•REMOTE terminal * bonly.
Removing the Terminal Covers
1 Open the terminal cover.
2Grasp the strip connecting the terminal cover to the camcorder and pull straight out.
Attaching the Terminal Covers
Insert the connecting strip into the opening to attach the terminal cover.
NOTES
•If the connecting strip is difficult to grasp, use a pair of tweezers or similar tool.
Preparing the Camcorder
33
Using the Wireless Controller
Inserting the Battery
Insert the supplied CR2025 lithium button battery into the wireless controller before use.
1Press the tab in the direction of the arrow () and pull out the battery holder ().
2Place the lithium button battery with the + side facing up ().
3 Insert the battery holder ().
Activating the Wireless Controller
By default, the wireless controller is activated. If it has been deactivated, follow the procedure below to activate it.
Operating modes: 
1Open the [Wireless Controller] submenu.
[JOther Functions] 
[Wireless Controller]
2Select [On] and then press SET.
NOTES
[JOther Functions]
[Wireless Controller]
[On]
• You can also activate the wireless controller by setting an assignable button to [Wireless Controller] (097).