Recording Audio
Activating the Microphone Attenuator
If the audio level is too high and the sound sounds distorted when recording with the
78MIC terminal, activate the microphone attenuator (12 dB for the
1Open the [Int. Mic Att.] submenu.
[mAudio Setup] 
[Audio Input] 
[Int. Mic Att.]
2 Select [On] and then press SET.
[mAudio Setup]
[Audio Input]
[Int. Mic Att.]
[Off]
Using Line Input or an External Microphone Connected to an XLR Terminal
Connecting an External Microphone to an XLR Terminal
Follow the procedure below to attach an external microphone to an XLR terminal (refer also to the following illustration).
1 Loosen the microphone lock screw (), open the microphone holder unit and insert the microphone ().
2Tighten the lock screw and put the microphone cable through the microphone cable clamp under the microphone holder unit ().
3 Plug the microphone cable into the desired XLR terminal ().
Microphone lock screw | Cable clamp | XLR terminals |