Switching Between External Microphone and Line Input
1 Set the AUDIO IN switch of the desired channel to EXT.
2Set the XLR terminal switch of the desired channel to LINE or MIC.
•To supply a microphone with phantom power, set the switch to MIC+48V instead. Make sure to connect the microphone first, before turning the phantom power on. Keep the microphone connected when turning off the phantom power.
•When using the XLR terminal to record to only one channel, use the CH1 input terminal and set the XLR terminal switch for CH1 to LINE, MIC or MIC+48V.
Selecting the Recording Channel
You can select to which channel the camcorder will record audio.
1Open the [XLR Rec Channel] submenu.
[mAudio Setup] 
[Audio Input] 
[XLR Rec Channel]
2 Select the desired option and then press SET.
Options
[CH1]: Records audio to each channel separately. Audio input into CH1 is recorded to channel 1, while audio input into CH2 is recorded to channel 2.
[CH1/CH2]: Audio input into CH1 is recorded to both channels. Audio input into CH2 will not be recorded.
Recording Audio
XLR terminal switches
79
CH1/CH2 AUDIO IN
switches
[mAudio Setup]
[Audio Input]
[XLR Rec Channel]
[CH1]
Adjusting the External Microphone’s Sensitivity
You can adjust the external microphone’s sensitivity if the XLR terminal switch is set to MIC or MIC+48V.
1Open the desired XLR terminal’s sensitivity submenu.
[mAudio Setup] 
[Audio Input] 
[XLR1 Mic Trimming] or [XLR2 Mic Trimming]
2 Select the desired level and then press SET.
Available Sensitivity Levels
+12 dB | +6 dB | 0 dB | ||
|
|
|
|
|
[mAudio Setup]
[Audio Input]
[XLR1 Mic Trimming] [XLR2 Mic Trimming]
[0 dB]