Adjusting the Focus

 

Magnification

 

Press the MAGN. button.

50

• iappears on the bottom of the screen and the center of the screen is

magnified approximately 2 times*.

• Press the button again to cancel the function.

* The magnification that appears on the LCD screen and on the viewfinder screen is different. The magnification also differs based on the video configuration.

NOTES

• Magnification appears only on the camcorder screen. It will not appear on an external monitor connected to the camcorder.

• Magnification will not affect your recordings.

Autofocus Mode

The camcorder uses the TTL autofocus system and continuously adjusts the focus on the subject in the center of the screen. The focusing range is 2 cm (0.8 in.; at full wide-angle, measured from the front of the lens barrel) to f.

During autofocus mode, you can turn the manual ring to focus manually. When you stop turning the ring, the camcorder returns to autofocus mode. This is useful in situations such as when focusing on a subject on the other side of a window.

Press the AF/MF button.

• Aappears on the bottom left of the screen.

Setting the Autofocus Mode

[lCamera Setup]

You can select how the camcorder focuses during autofocus mode.

 

1

Open the autofocus [Speed] submenu.

[AF Mode]

 

 

[lCamera Setup] [AF Mode] [Speed]

[Speed]

2

Select the desired option and then press SET.

 

[Instant]