White Balance

Custom White Balance

You can store two custom white balance settings in the camcorder for future use.

62 1 Press the WB button to select the FA or FB custom setting.

• The FA or FB appears next to the color temperature on the screen. If another icon appears or no icon appears, press the button again until the desired icon appears.

2 Point the camcorder at a white object so that it fills the whole screen.

• Use the same lighting conditions you plan to use when recording.

3 Press the Sbutton.

•The FA or FB icon will flash quickly.

•Make sure the white object fills the screen until the procedure is completed.

•After the icon stops flashing, the procedure is completed. The setting is retained even if you turn off the camcorder.

NOTES

•Set the [lCamera Setup] [Tele-converter] setting (0146) to [Off] in advance.

•Readjust the custom white balance if the light source changes.

•Very rarely and depending on the light source, Fmay keep flashing (it will change to a slow flashing). The result will still be better than with the auto white balance.