Adjusting the Built-in Speaker Volume

1Open the [Speaker Volume] submenu.

[mAudio Setup] [Audio Output] [Speaker Volume]

2Select the desired level and then press SET.

• Select [Off] to mute the audio.

NOTES

•For details on changing the audio channel, refer to Selecting the Audio Channel (0129).

Playback

[mAudio Setup]

[Audio Output]

115

[Speaker Volume]

[8]

Adding Shot Marks during Playback

You can add an cmark, dmark or both marks to a clip during playback or playback pause. You can add either mark using assignable buttons or an cmark using the wireless controller’s SHOT1 button.

1 Set an assignable button to [Shot Mark 1] or [Shot Mark 2] (097).

2 During playback or playback pause, press the assignable button at the point in the clip to add the shot mark.

•A message indicating the shot mark appears on the screen and the shot mark is added to the clip.

•Adding a shot mark to a clip during playback will pause the playback.

•Up to 100 shot marks (cand dmarks combined) can be added to a single clip.

•There may be up to a 0.5 second delay from when you press the button to when the camcorder adds the shot mark.