3In the print settings menu, select
(
, 
) the setting you want to
change and press ( 
).
4Select (
) the desired setting
option and press ( 
).
5Select (
) [PRINT] and press
( 
).
•Printing starts. The print settings menu disappears when printing is completed.
•To continue printing, select (
) another still image.
TO CANCEL THE PRINTING
1 Press ( 
) while printing.
2 Select (
) [ K] and press ( 
).
PRINTING ERRORS
If an error occurs during the printing process, an error message appears
(
84).
-anon’s
press ( 
). If [ ONTINUE] cannot be
selected, select [STOP], press ( 
) and retry printing. Refer also to the printer’s instruction manual for details.
-If the error still persists and printing does not restart, disconnect the USB cable and turn off the camcorder and the printer. After a short while, turn
them on again, set the camcorder to
mode and restore the connection.
WHEN YOU HAVE FINISHED PRINTING
Disconnect the cable from the camcorder and printer and turn off the camcorder.
IMPORTANT
•The following still images may not be correctly printed with a PictBridge- compatible printer.
-Images created or changed on a computer and transferred to the memory card.
-Images recorded with the camcorder but edited on a computer.
-Images whose file names were changed.
-Images not recorded with this camcorder.
•Observe the following precautions during printing:
-Do not turn off the camcorder or the printer.
-Do not change the position of the
/
switch.
-Do not disconnect the USB cable.
-Do not remove the memory card.
•If the message “BUSY” does not disappear, disconnect the USB cable and restore the connection after a short while.
Print Orders
You can mark in advance the still images you want to print and set the desired number of copies as a print order. Later, you can easily print out the print orders by connecting the camcorder to a
printer (
57). You can set print orders for up to 998 still images.
59