Printing Photos

Printing Photos – Direct Print

The camcorder can be connected to any PictBridge-compatible printer. You can mark in advance the still images you want to print and set the desired number of copies as a print order

( 59).

the printer. After a short while, turn them on again, set the camcorder to mode and restore the connection.

NOTES

• will appear for images that cannot be printed.

•We recommend powering the camcorder using the compact power adapter.

•Refer also to the printer’s instruction manual.

Canon printers: SELPHY printers of the CP, DS and ES series and PIXMA printers marked with the PictBridge logo.

onnecting the amcorder to the Printer

( 23)

1Insert the memory card containing the still images you want to print.

2Turn on the printer.

3Connect the camcorder to the printer using the supplied USB cable.

•Refer to PC Connection Diagrams

( 67).

• appears and changes to .

IMPORTANT

If continues to flash (for more than

1 minute) or if does not appear, the camcorder is not correctly connected to the printer. In such case, disconnect the USB cable and turn off the camcorder and

Selecting the rint Settings

You can select the number of copies and other settings for printing. The setting options vary depending on your printer model.

Options

[PAPER]

[ PAPER SIZE]: Available paper sizes vary depending on the printer model.

[ PAPER TYPE]: Select [PHOTO], [FAST PHOTO], [PLAIN] or [DEFAULT].

[ PAGE LAYOUT]: Select [DEFAULT] or one of the following available page layouts. [BORDERED]: Prints the whole image area almost exactly as the recorded still image. [BORDERLESS]: Enlarges the center portion of the still image to fit the width/height ratio of the selected paper size. The top, bottom and sides of the still image may be slightly trimmed out. [2-UP], [4-UP], [8-UP], [9-UP], [16-UP]: Refer to the sidebar on page 58.

57