Additional Information

Direct Print Related Messages

About Canon PIXMA/SELPHY DS Printers: If the printer’s error indicator flashes or an error message appears on the printer’s operation panel, refer to the printer’s instruction manual.

CANNOT PRINT!

-You attempted to print an image that was recorded with another camcorder, with a different compression, or was edited on a computer.

COMMUNICATION ERROR

-The printer is experiencing a data transfer error. Cancel printing. Disconnect the USB cable and turn off the

camcorder and the printer. After a short while, turn them on again, set the camcorder to mode and restore the connection. If you attempted to print from a memory card that contains a large number of images, reduce the number of images.

COULD NOT PRINT X IMAGES

-You attempted to use the print order settings to print X images that were recorded with another camcorder, with a different compression or were edited on a computer.

FILE ERROR

-You attempted to print an image that was recorded with another camcorder, with a different compression, or was edited on a computer.

HARDWARE ERROR

-ancel printing. Turn off the printer and turn it back on. Check the printer status. If the printer is equipped with a battery, it might be exhausted. In such case, turn off the printer, replace the battery and turn it back on.

IN OMPATIBLE PAPER SIZE

- The paper settings of the camcorder conflict with the printer's settings.

INK ABSORBER FULL

-Select [ ONTINUE] to resume printing. Contact a Canon Service Center (refer to the list included with the printer) to replace the ink absorber.

INK ERROR

- There is a problem with the ink.

LOW INK LEVEL

- The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart printing.

NO INK

- The ink cartridge is not inserted or is out of ink.

NO PAPER

- Paper is not correctly inserted or there is no paper.

NO PRINTHEAD

- No print head is installed in the printer or the print head is defective.

84