NOTES

•When you wake up the camcorder from standby mode, the following settings will be changed automatically:

-Manual focus returns to automatic focus (AF).

-Manual exposure adjustment returns to automatic exposure.

-Zoom position returns to full wide- angle W.

•The camcorder will shut off if left in standby mode for 10 minutes, regardless of the [POWER SAVE] setting

( 78). To restore the power if the camcorder shut off, turn the camcorder off and then on again.

•The camcorder will be woken up from standby mode if you open the cassette compartment cover or change the

position of the / switch while the camcorder is in standby mode (standby lamp is on).

Reviewing the Last Scene Recorded

( 23)

EXP

FOCUS

1Set the mode switch to .

2If the joystick guide does not

appear on screen, press ( ) to display it.

3Push the joystick ( ) momentarily

toward and release it.

•The camcorder will play back a few seconds of the last recording made and return to record pause mode.

•You can also hold the joystick

pressed ( ) toward or ( )

toward to play back the tape (reverse or forward respectively) in order to locate the point where you want to start recording.

35