External Connections
Audio Dubbing |
| IMPORTANT |
You can add sound to a recording using the
( 23)
POINTS TO CHECK
You can only dub audio on tapes recorded
in SP mode with [ 12bit] audio
( 44). This function is operated with the wireless controller.
STOP
•Audio dubbing will stop if the tape has a blank section or a section recorded in
LP mode or [ 16bit] audio.
•The quality of the dubbed sound will not be as good when dubbing audio to a tape that was not recorded with this camcorder or after having dubbed audio over the same scene more than 3 times.
NOTES
You can connect the camcorder to a TV to check the picture on the TV screen and check the sound through headphones connected to the TV.
PAUSE
AUDIO DUB.
AUDIO | |||
REW | PLAY | FF | TO SELECT THE AUDIO TRACK FOR PLAYBACK |
| ST P |
|
|
PAUSE | SL W |
| You can select the audio track that will |
| ZERO SET |
| be played when playing back a tape |
| TV SCREEN | that was audio dubbed ( 45). | |
DUB. MEM RY | |||
|
|
|
1Locate the point where you want to start dubbing audio.
Before locating the starting point, you can also set the zero set
memory ( 37) at the point where you want the audio dubbing to end. The camcorder will automatically stop audio dubbing at that point.
2Start playback and immediately press PAUSE .
3Press AUDIO DUB. .
“AUDIO DUB.” and appear.
4Press PAUSE to begin dubbing. Speak into the microphone.
5 Press STOP to stop dubbing.
66