Video

NOTES

•About the recording time: By changing the recording mode you can change the video quality and as a result, also the

available recording time ( 75).

•Previous recordings overwritten by a new recording cannot be recovered. Before you start recording, search for

the end of the last recording ( 38).

•To protect the tape and video heads, the

camcorder will enter the stop mode ( )

if left in record pause ( ) mode for 4 minutes 30 seconds. To resume recording press Start/Stop .

•About the Power Save mode: To save power when the camcorder is powered by a battery pack, the camcorder will automatically shut off if left without any

operations for 5 minutes ( 78). To restore the power, turn the camcorder off and then on again.

•When recording in very loud places (such as fireworks shows or concerts), sound may become distorted or it may not be recorded at the actual levels. This is not a malfunction.

Using the Viewfinder

When recording in bright places it may be difficult to use the LCD screen. In such case, change the brightness of the LCD screen

( 28, 76) or use the viewfinder instead. To use the viewfinder, keep the LCD panel closed*.

Adjust the viewfinder as necessary with the dioptric adjustment lever.

*The LCD screen and the viewfinder can be used simultaneously only when the LCD panel is turned

180 degrees to face the subject

( 27).

About the Mode Switch and Recording Programs

Set the mode switch to to let the camcorder adjust all the settings for you, allowing you to just point the camcorder and start shooting.

Set the mode switch to to select one of the recording programs.

The Special Scene recording programs ( 40) offer a convenient way to select the optimal settings to match special recording

conditions. The [ PROGRAM AE] recording program ( 42), on the other hand, allows you to set the shutter speed you want, or enjoy the flexibility to change other settings.

32