Video
NOTES
If there are blank sections between recordings, the zero set memory may not work correctly.
Locating the Beginning of a Recording Date
You can locate the change of the date/ time zone with the date search function.
( 23)
Press or on the wireless controller.
•Press more than once to search for further date changes (up to 10 times).
• To cancel the search press ST | . |
NOTES
•The date search function will not detect recordings shorter than 1 minute per date/time zone.
•Date search may not function if the data code is not displayed correctly.
Locating the End of the Last Scene
After playing back a tape, use this function to locate the end of the last scene recorded in order to continue recording from that point.
( 23)
POINTS TO CHECK
Stop the playback before using this function.
FUNC.
FUNC.
[ END SEARCH] [EXECUTE]
•“END SEARCH” appears.
•The camcorder rewinds/fast forwards the tape, plays back the last few seconds of the recording and stops the tape.
•To cancel the end search push the joystick ( ) toward .
NOTES
•End search cannot be used once you remove the cassette.
•If there are blank sections between recordings, the end search may not work correctly.
•You cannot use the end search to locate the end of a scene that was audio dubbed.
38