Toy Caboose Stroller Instruction Manual Page 3
Assembling and Using your Stroller
To ensure safe operation of your stroller, please follow these instructions carefully.

Unpacking the Product

• Carefully remove stroller and all parts from the box and plastic bag.
• Remove the cardboard packing materials from the ends of the frame.
• Identify the parts (stroller, canopy, tray, front wheels (2), rear wheels (2), rear axle,
washers (2), axle locks (2), axle caps (2), hubcaps (2), car seat carrier support and
documents with the pictures in Figures 1 and 1A.
• Discard all packaging materials properly. Do not allow children to play with them.
WARNING

Adult assembly required. No tools required. Package

contains small parts. Keep small parts out of children’s reach

during assembly.

Figure 1 Figure 1A

Unfolding the stroller

• Orient the stroller with the handle bar
away from you.
• Release the locking latch located on
the lower right side by lifting up the
lever. See Figure 2.
• Lift up on the stroller handle with both
hands until the stroller is in the open
position and both side frame bars
snap into place in their holders.
Figure 2