FACTORY-INSTALLED OPTIONS (52P AND 52C)
WALL THERMOSTAT
CONTROL (RC,RP)
Carrier’s wall thermostat control option includes:
•a standard chassis with front panel
•
thermostat operation
• indoor coil freeze protection
• user accessible selector switch for high or low fan speed
FAN SPEED
C o m f o r t
Wall thermostat and wall thermostat wire must be ordered separately.
See page 50 for a diagram of multiple PTAC units con- trolled by a single thermostat.
NOTE: Be sure to connect reversing valve wiring to the O connection of the thermostat for heat pump applications.
NOTE: Do not use a power stealing digital thermostat (common must be connected for digital thermostats).
CORROSION PROTECTION (CP,RP)
To protect against the corrosive effects of a seacoast environment, this option includes:
•a standard chassis with front panel
•special protections consisting of:
—painted control box and unit partitions
—
—stainless steel tube sheets (outdoor coil)
—totally enclosed fan motor with moisture- resistant windings
NOTE: All installations within one mile of the sea coast or other corrosive environment must use Corro- sion Protection (CP).
15