Carrier 592-085 warranty Subbase, Non-electricalsubbase, Electrical subbase, Hardwired subbase

FIELD-INSTALLED ACCESSORIES (52P AND 52C) (cont)

SUBBASE

Part No.: SUBBASE-NON-ELEC	Part No.: SUBBASE-230V-30A	Part No.: SUBBASE-265V-30A
Part No.: SUBBASE-230V-15A	Part No.: SUBBASE-265V-15A	Part No.: SUBBASE-HARDWIRE
Part No.: SUBBASE-230V-20A	Part No.: SUBBASE-265V-20A	Part No.: LEVELING-LEGS

This decorative subbase supports the unit and is avail- able in three basic models: non-electrical, electrical, and hardwired.

A subbase (or leveling legs) is required for installa- tions where the wall sleeve extends 4 or more inches into the room or the wall is less than 2 in. thick. The minimum clearance between the bottom of the sleeve and the floor is 31/4 in., and the maximum clear- ance is 51/2 inches.

IMPORTANT: All standard cord-connected 265-v PTAC units will require a field-installed electrical subbase accessory per UL and NEC electrical codes.

All subbase models are pre-assembled, mount to the wall sleeve, and come with adjustable legs and side skirting to provide a finished appearance.

Non-electrical subbase

The easy to install, non-electrical subbase provides mechanical support and requires no wiring.

Non-Electrical Subbase Assembly

Electrical subbase

The electrical subbase has a factory-installed electrical junction box containing a receptacle for corded pack- aged terminal air conditioner (PTAC) units. The elec- trical subbase series offers models from 230-v, 15 amp up to 265-v, 30 amp. Knockouts are provided for power source connections.

Electrical Subbase Assembly

Hardwired subbase

The hardwired electrical subbase has a factory- installed junction box containing 19 in. of flexible conduit (for a perfect fit to the PTAC unit) and all mat- ing connections for easy assembly to PTAC units. Knockouts are provided for power source connections.

Hardwired Subbase Assembly

20