*NPT plug is field supplied. NOTE: Follow all local codes.

Fig. 53 — Gas Piping Details

Step 18 — Install Flue/Inlet Hoods and Baffles — The flue/inlet hoods and baffles are shipped in a package taped to the basepan in the fan section. The flue (out- let) hoods are pre-assembled. The flue deflector, inlet hoods, and baffles require assembly.

The hoods are located on the heating section access panel as shown in Fig. 54 (sizes 030-050), Fig. 55 (sizes 055-100 with low heat and vertical supply), Fig. 56 (sizes 055-100 with low heat and horizontal supply), and Fig. 57 (sizes 055-100 with high heat). The inlet baffles are located inside the access panel as illustrated in Fig. 58 (sizes 030-050), Fig. 59 (sizes 055-100 with modulating low heat and horizontal supply), and Fig. 60 (sizes 055-100 with modulating high heat). See Table 26 for a list of parts used to assemble each hood and quantities of each hood type and baffle used with each unit.

1.Remove shipping block-offs and shipping tape from all openings in the access panel.

2.Attach flue outlet hoods (see Fig. 61) to access panel us- ing screws provided. Hoods are placed over each com- bustion outlet.

3.Install flue deflector baffle inside flue deflector hood. See Fig 62 for V-type deflector and Fig. 63 for curve-type deflector. For V-type deflector, screw the baffle and hood

14-IN.

INLET HOOD

FLUE HOOD AND

FLUE DEFLECTOR

HOOD (48 SERIES

HIGH-HEAT ONLY)

14-IN.

INLET HOOD

FLUE HOOD AND

DEFLECTOR

HOOD

14-IN.

INLET HOOD

Fig. 54 — Flue/Inlet Hood Locations, 030-050 Units

a48-8469

together with screw provided. Refer to Table 26 for usage.

4.Install flue deflector hood assembly over each flue outlet hood. See Fig. 64. Observe the offset mounting hole loca- tions in the deflector hood flanges when attaching hood to panel. Holes in the mounting flange must be at the bottom when attached.

5.Inlet hoods are shipped unassembled and must be assem- bled on the access panel (see Fig. 65-67). Flanges of the hood top and sides should be installed on the inside of the access panel openings with the screws provided. The sides should be placed on the inside of top hoods for all hood assemblies (6-in., 14-in., and 30-in.). Attach speed clips to screen. Insert screen into bottom opening of 6-in. and 14-in. hoods and secure it with 3 screws. To ease the installation, the 30-in. hood screen may be inserted from inside of access panel (gas section door) into bottom opening of hood. Secure with 5 screws. Attached view port cover over 14-in. inlet hood opening (Fig. 66). Se- cure with two screws.

6.Install inlet baffle on the access panel with the screw(s) provided. See Fig. 68 for 14-in baffle and Fig. 69 for 30-in baffle. Attach 14-in baffle from the outside of the access panel. The 30-in baffle should be installed from in- side of the access panel. Secure with three screws.

Step 19 — Install Supply-Air Thermistors (Staged and Modulating Gas Units Only) —

Supply-air thermistors are a field-installed, factory-provided component. Three supply-air thermistors are shipped with staged and modulating gas units inside the unit control box. Thermistor wires must be connected to the SGC in the unit control box. See Table 27. The supply-air thermistors should be located in the supply duct with the following criteria:

•downstream of the heat exchanger cells

•equally spaced as far as possible from the heat exchanger cells

•a duct location where none of the supply air thermistors are within sight of the heat exchanger cells

•a duct location with good mixed supply air portion of the unit.

FLUE OUTLET

HOOD

FLUE HOOD

AND FLUE DEFLECTOR

HOOD

VIEW PORT COVER

14-IN. INLET HOOD

6-IN. INLET HOOD

a48-8470

Fig. 55 — Flue/Inlet Hood Locations, Sizes 055-100,

Low Heat, Vertical Supply Units

62

Page 61 Page 63
Page 62
Image 62
Carrier 48P2, P5030-100, P3, P4 installation instructions Gas Piping Details
Page 61 Page 63

P4, 48P2, P3, P5030-100 specifications

Carrier, a leader in the HVAC industry, offers a range of advanced air conditioning systems designed to provide optimal indoor climate control. Among their innovative products are the Carrier P4, P5030-100, P3, and 48P2 models, each delivering unique features tailored to diverse applications.

The Carrier P4 series is engineered for versatility and efficiency. This compact unit integrates advanced inverter technology, allowing for precise temperature control and reduced energy consumption. The P4 employs a variable speed compressor, which adjusts according to cooling needs, ensuring both comfort and energy savings. Additionally, it features a user-friendly interface with smart connectivity options, enabling remote access and management via smartphones.

Next in line, the Carrier P5030-100 model is designed with commercial applications in mind. It is equipped with a robust scroll compressor and advanced heat exchange technology that enhances its performance and efficiency. The P5030-100 operates quietly, making it ideal for office environments where noise reduction is a priority. Furthermore, its eco-friendly refrigerant aligns with today’s environmental standards, further making it a sustainable choice for businesses.

The Carrier P3 model excels in energy efficiency, boasting top SEER ratings while maintaining powerful cooling and heating capabilities. This model incorporates advanced refrigerant management, which minimizes environmental impact while ensuring optimal performance. Its compact design makes it an excellent choice for residential installations, providing homeowners with an unobtrusive yet effective climate control solution.

Finally, the Carrier 48P2 unit stands out with its robust design tailored for large-scale applications. It features a high-capacity scroll compressor and enhanced airflow capabilities, ensuring consistent and reliable performance across various conditions. The 48P2 comes equipped with a comprehensive control system that allows for integration with building management systems, facilitating easy monitoring and control of multiple units. This model is ideal for commercial buildings that demand high performance and energy efficiency.

Overall, Carrier's P4, P5030-100, P3, and 48P2 models represent the forefront of HVAC technology, combining efficiency, reliability, and advanced features to meet the varying demands of both residential and commercial environments. With a commitment to innovation and sustainability, Carrier continues to provide solutions that enhance indoor comfort while reducing environmental impact.
Top Page Image Contents