Direct - Touch
W-74 Operation
Operation Power
1 2
0
4 3
The |
| power button is normally left in the on position. Always turn the | 4 | 3 | |
| |||||
|
|
|
| ||
power | off during cleaning or servicing the fan and during thunderstorms. It |
|
|
| |
|
|
| |||
is also used to exit or enter additional programs. |
|
|
| ||
|
|
| |||
The |
| power button must be left on to retain a previously set fan speed |
|
|
|
or light level.
Operation Speed Control
There are five individual speed settings for the fan. Each speed is indicated by the number on the controller and an audible tone for each speed.
To select the desired fan speed:
Press the number on the controller corresponding to the speed desired. 4 is high, 3 medium, 2 low, 1
1 2
0
4 3
Note: It is normal for the fan to start in the "High" position from "Off" before changing to the selected speed.
Operation Reversing Airflow
The direction of airflow can be changed from downward to upward or from upward to downward.
4 3
To reverse the airflow:
1. Make sure the fan is on and blades are turning.
2. Press the 
reverse button.You will hear a series of clicks from the fan as it speeds up before coming to a stop and changing direction.
Operation Lights
To turn the lights off and on, press and release the
button for either the up or down lights for less than one second.
To dim either the up or down light, Press and hold the
button for either the up or down light for more than 1 second.The light will come on at the last brightness setting and increase in brightness until full power is reached, then start dimming until the lowest setting is reached.This cycle will repeat until you release the light button.
Up Light
Down Light
1 2
Note:The dimming feature will only work as long as the dimming feature remains active. See "Operation CFL mode".
19
