
1 2
0
4 3
1.
2.
Operation Home-Safe® Program
To operate the power button off for at least 5 seconds.
Turn the on. Immediately press and hold the "3" button for 5 seconds. A series of tones will be heard through the
Note:This program overrides all manual control of lights and fan.
3. The lights will automatically cycled on and off in a controlled sequence as follows: ON 1 hour, OFF ½ hour, ON 2 hours, OFF 1 hour, ON ½ hour then OFF 2 hours.This seven hour pattern will repeat continuously so that a different pattern of lighting is seen each day of the week.
4. 4)To cancel the Button OFF for five seconds.
Operation Fan-Minder™ Program
The
1. To operate the lights for Light Minder Program power button off for at least 5 seconds.
2. Turn the on. Immediately press and hold the "2" button for 5 seconds. A series of tones will be heard through the
3. The fan will respond with three descending tones. A timer is now initiated and the fan will reduce one speed for each
4. You may increase the fan speed by pressing and holding any of the fan speed buttons until the desired speed is reached, then release it.The fan will again reduce one speed for each 2 hour interval.
5. To cancel the OFF for 5 seconds.
22