Configuring Camera Sound Settings (Sounds)
Procedure
[MENU] * Set Up Tab * Sounds
| Startup |
| |
| Half Shutter | Specifies the startup sound | |
|
|
| Sound 1 - 5: |
| Shutter | ||
| Off: Sound off | ||
| Operation |
| |
|
| Operation | Specifies the sound volume. This setting is also used as the |
| = | ||
| audio level during video output (page 144). | ||
|
|
| |
|
|
| Specifies the volume of movie audio output. This volume |
| = | Play | setting is not used during video output (from the USB/AV port) |
|
|
| (page 144). |
|
|
|
|
• Setting a volume level of 0 mutes output.
Specifying the File Name Serial Number Generation Rule (File No.)
Procedure
[MENU] * Set Up Tab * File No.
Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 134).
Tells the camera to remember the last used file number. A new file will be named using the next sequential number, even if files are deleted or if a blank memory card is loaded. If a memory card is loaded and that
Continue card already has files stored on it and the largest sequential number in the existing file names is greater than the largest sequential number remembered by the camera, numbering of new files will start from the largest sequential number in the existing file names plus 1.
Restarts the serial number from 0001 whenever all files are deleted or when the memory card is replaced with a blank one. If a memory card
Reset is loaded and that card already has files stored on it, numbering of new files will start from the largest sequential number in the existing file names number plus 1.
138 | Other Settings (Set Up) |
|