To shoot a snapshot

1.Remove the lens cap and then press [r] (REC) to turn on the camera.

2.Set the mode dial to t (Auto).

3.Set the CS dial to t (Single Shot).

•You can use either monitor screen or viewfinder to compose the image. Each press of the [EVF/LCD] button cycles through the available monitor screen and viewfinder on/off settings (page 146). If the image in the viewfinder appears blurry, use the diopter dial to adjust it.

Snapshot mode icon

[r] (REC)

CS dial

 

 

Shutter button

 

 

Mode dial

 

Diopter dial

 

 

Viewfinder

[EVF/LCD]

 

 

 

Monitor screen

 

4. Point the camera at

Zoom controller

the subject.

 

You can zoom the

 

image, if you want.

 

 

z Telephoto w Wide Angle

5. Half-press the shutter

Back lamp

button to focus the image.

 

When focus is complete, the camera will beep, the back lamp will light green, and the focus frame will turn green.

Focus frame

18

Quick Start Basics