Correcting for Back Lighting

Back lighting correction compensates for the overexposure that can occur when shooting a backlit subject. Press Æ (Back Lighting Correction button) to toggle back lighting correction on and off.

•When a main subject is overexposed due to backlighting, the camera uses EV shift exposure correction and dynamic range correction to adjust appropriately.

•This function is disabled in the M (Manual Exposure) mode.

Æ(Back Lighting Correction button)

Locking the Auto Exposure and Auto Focus Setting

Pressing [AE-L/AF-L] temporarily locks the current

[AE-L/AF-L]

exposure and/or focus settings. Press [AE-L/AF-L] again to

 

unlock the settings.

 

• Pressing [AE-L/AF-L] while the shutter button is half-

 

pressed will lock the current exposure or focus setting.

 

Specifying the [AE-L/AF-L] button Operation

Use the following procedure to specify the operation that the [AE-L/AF-L] button performs.

1.In the REC mode, press [MENU].

2.Use [4] and [6] to select “REC”.

3.Use [8] and [2] to select “AE/AF Lock” and then press [6].

4.Use [8] and [2] to change the setting, and then press [SET] to apply it.

AE Lock

Exposure lock

AF Lock

Focus lock

AE/AF Lock

Exposure and focus lock

 

 

NOTE

•AE Lock and AF Lock are not supported while “O Tracking” is selected for the “AF Area” setting.

•Performing an EV shift operation while AE Lock is in effect will cause Auto Exposure to be unlocked.

•Performing a zoom operation while AF Lock is in effect will cause Auto Focus to be unlocked.

45

Snapshot Tutorial