Time Stamping Snapshots (Timestamp)
Procedure
[MENU] * Set Up Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or deleted.
Example: December 19, 2009, 1:25 p.m.
Date | 2009/12/19 |
Date&Time | 2009/12/19 1:25pm |
Off | No stamping of date and/or time |
|
|
•Even if you do not stamp the date and/or time with Timestamp, you can do so later using the DPOF function or some printing application (page 120).
•Stamping is performed in accordance with the date and time settings (page 140) and the display style settings (page 141).
Setting the Camera’s Clock (Adjust)
Procedure
[MENU] * Set Up Tab * Adjust
[8] [2] Change the setting at the cursor location
[4] [6] Move the cursor between settings
[DISP] Toggles between
When the date and time settings are what you want, press [SET] to apply them.
•You can specify a date from 2001 to 2049.
•Be sure to select your Home City (page 139) before setting the time and date. If you set the time and date while the wrong city is selected for your Home City, the times and dates of all of the World Time cities (page 139) will be wrong.
140 | Other Settings (Set Up) |
|