Shooting with the REC Light (REC Light)

You can use the REC light for illumination when recording

LED light

a movie where lighting is dim. Turning on the REC light

Flash

causes the LED light to light and stay on.

 

1. In the REC mode, set the CS dial to t (Single

Shot).

2. Use [8] and [2] to select the second control panel option from the bottom (REC Light).

3.Use [4] and [6] to select “On” and then press [SET]. When “On” is selected, the LED light remains lit.

•The effectiveness of the REC light is reduced in the case of far away subjects.

•You will be able to use the LED light during movie recording only if you open the flash before you start recording.

•To toggle the LED light off and on during recording, press the [2] button. You cannot turn the LED light off and on during High-speed Movie recording.

Changing the Control Panel Date Style

1.In the REC mode, use [8] and [2] to select the bottom control panel option (Date).

You can use [4] and [6] to select date or time display.

NOTE

•You can select either of two display styles (page 141) for the date: Month/Day or Day/Month.

•The time is displayed using 24-hour format.

39

Snapshot Tutorial