Always Ask
After continuous shutter shooting is finished, a prompt appears allowing you to select Normal (Batch) or Select & Save.
Select the save method you want to use and then press [SET]. Save Selected: Saves selected images.
Save All | : Saves all the images. |
Cancel Save | : Does not save any of the images. |
5.Press [SET] to apply the setting.
Continuous Shutter Precautions
•If there is not enough available capacity on the memory card, you may not be able to record the number of CS images indicated on the monitor screen. Make sure your memory card has sufficient remaining capacity before shooting with using continuous shutter.
•With continuous shutter, exposure and focus for the first image are applied for successive images as well.
•Continuous shutter cannot be used in combination with any of the following. Movie Mode, some BEST SHOT scenes (Digital Anti Shake, Move Out CS, Move In CS, Digital Panning)
•When using a continuous shutter mode, keep the camera still until shooting is finished.
•In the Prerecord (Still image) and
•Zoom is disabled during continuous shutter operations.
•When the
Up to 60 images | |
Prerecord (Still image) | Up to 60 images |
Flash CS with flash | Up to 3 to 20 images |
Flash CS with LED light | Up to 60 images |
Bracketing | Up to 5 images |
|
|
The number of images will be restricted even further or shooting may be impossible when remaining memory card capacity is less than the allowable number of images for a particular CS mode.
•The Flash CS mode switches between the flash and the LED light automatically in accordance with the CS speed. You cannot switch between the flash and the LED light manually. In the Flash CS mode, either the flash or the LED light will fire whenever an image is shot.
•The Triple
60 | Snapshot Tutorial |
|