3.Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing on the camera’s monitor screen.
•Pressing [ON/OFF] or [r] (REC) will not turn on the camera while the AV cable is connected.
•You also can change the aspect ratio of the screen and the video output system (page 157).
4.Now you can display images and play back movies as you normally do.
IMPORTANT!
•Before connecting to a TV to display images, be sure to configure the camera’s
[r] (REC) and [p] (PLAY) buttons for “Power On” or “Power On/Off” (page 156).
•Audio is initially output by the camera at maximum volume. When you first start displaying images, set the TV volume control at a relatively low level and then adjust it as required.
NOTE
•Audio is monaural.
•Some TVs may not be able to output images and/or audio correctly.
•All icons and indicators that appear on the monitor screen also appear on the TV screen. You can use [8] (DISP) to change the display contents.
Recording Camera Images to a DVD Recorder or Video Deck
Use the following method to connect the camera to the recording device using the camera’s bundled AV cable.
–DVD recorder or video deck: Connect the AV cable to the VIDEO IN and AUDIO IN terminals.
–Camera: Connect the AV cable to the USB/AV port
You can play a slideshow of snapshots and movies on the camera and record it on a DVD or video tape. You can record movies by selecting “» Only” for the slideshow “Images” setting (page 108). When recording images to an external device, use [8] (DISP) to clear all indicators from the monitor screen (page 159).
For information about connecting a monitor to the recording device and about how to record, see the user documentation that comes with the recording device you are using.
107 | Viewing Snapshots and Movies |
|