Configuring [r] and [p] Settings (REC/PLAY)
Procedure
[MENU] * Set Up Tab * REC/PLAY
Power On | Camera turns on whenever [r] (REC) or [p] (PLAY) is | |
pressed. | ||
| ||
Power On/Off | Camera turns on or off whenever [r] (REC) or [p] (PLAY) is | |
pressed. | ||
| ||
Disable | Camera does not turn on or off when [r] (REC) or [p] (PLAY) | |
is pressed. | ||
| ||
|
|
•With “Power On/Off”, the camera turns off when you press [r] (REC) in the REC mode or [p] (PLAY) in the PLAY mode.
•Change this setting to “Power On” or “Power On/Off” before connecting to a TV for image viewing.
Configuring USB Protocol Settings (USB)
Procedure
[MENU] * Set Up Tab * USB
You can use the procedure below to select the USB communication protocol, which is used when exchanging data with a computer, printer, or other external device.
| Select this setting when connecting to a computer (pages 132, | |
Mass Storage | 141). With this setting, the computer sees the camera as an | |
external storage device. Use this setting for normal transfer of | ||
| ||
| images from the camera to a computer. | |
PTP | Select this setting when connecting to a printer that supports | |
PictBridge (page 122). This setting simplifies the transfer of image | ||
(PictBridge) | ||
data to the connected device. | ||
| ||
|
|
156 | Other Settings (Set Up) |
|