Shooting an Image in Accordance with Subject Movement (Move Out CS/Move In CS)
You can use these features to shoot an image automatically whenever the subject moves into or moves out of a frame on the monitor screen. You also can configure the camera to record images of what happened immediately before and after the subject moves.
| Automatically records what happened immediately before and | |
Move Out CS | after the subject moves outside of a boundary on the monitor | |
| screen. | |
Move In CS | Automatically records what happened immediately before and | |
after the subject moves into a boundary on the monitor screen. | ||
| ||
|
|
.To setup the camera
1.Press [BS] and then select “Move Out CS” or “Move In CS”.
2.Press [SET].
3.Configure the boundary location and size settings.
[8] [2] [4] [6] Moves the boundary.
Zoom controller Resizes the boundary.
4. Press [SET]. | Boundary |
•If you want to reconfigure the settings, start again from step 2.
5.Press [2].
6.Use [8] and [2] to select the fifth control panel option from the top
75 | Using BEST SHOT |
|