4.Image recording will continue until the end of the recording time is reached.

•While the camera is in Move In CS recording standby, you can cancel standby by pressing the shutter button all the way down. You then will be able to shoot images normally.

•To stop an ongoing real-time recording operation, press [SET].

5.Save the CS images (page 55).

NOTE

•Compose the image so the entire subject and its background are within the boundary. Recording may not be performed correctly if there is little difference between the subject and the part of the background enclosed by the boundary. Also, Move Out CS may not record correctly if the subject is not in the center of the boundary.

•Move In CS and Move Out CS do not operate correctly if you press the shutter button all the way down. Be sure to half-press the shutter button. After images are pre-recorded, press the shutter button the rest of the way down.

•After pressing the shutter button all the way to put the camera into record standby, keep the camera still. Recording may not be performed correctly if you move the camera during record standby.

•The camera will shoot only with Continuous Shutter (CS) while this BEST SHOT scene is selected.

•To cancel this BEST SHOT scene and enter the Continuous Shutter mode, press Ç (Continuous Shutter).

•The sleep mode and Auto Power Off are disabled while the camera is in record standby.

•The camera may not start recording automatically or camera power may turn off when battery power is low. Always make sure that the battery is sufficiently charged before using these features.

•To save all of the continuous shutter images, select “Save All” (page 55) as the continuous shutter image save method. If you do, make sure that the memory card loaded in the camera has enough free space to store them.

•Zoom is disabled, and focus and exposure are fixed while the camera is in recording standby.

79

Using BEST SHOT