NOTE

•Lag Correction will not be performed if you press the shutter button all the way without first pressing it half way.

•If the camera’s image size setting is 9M, 3:2, or 16:9 when you shoot with Lag Correction, the size of the resulting image will be 6M.

•The shooting range of Lag Correction is narrower than that of the Single Shot mode.

•The lag correction time you should select depends on a variety of factors. The lag from the point when you decide to shoot to the point when the shutter actually releases depend on the individual photographer and on shooting conditions. Experiment with different settings until you find the one that suits you best.

•Failure to pay proper attention to the subject when shooting can increase the lag time considerably.

•Note the following when selecting a lag correction time.

–If you are viewing the subject with the monitor screen, try selecting “–0.2” as the lag correction time. If you are looking directly as the subject, try “–0.1”.

–If timing is off with the above settings, try changing the lag correction time to “–0.3” when using the monitor screen and “–0.2” when looking directly at the subject.

•Using Lag Correction causes the flash setting to become ? (flash off) automatically.

B

44

Snapshot Tutorial