Isolating Moving Subjects (Multi-motion image)

Multi-motion image can be used to isolate a moving subject within a series of multiple images and place them against a stationary background. Use a tripod or some other means to make sure that the camera is not moving or shaking when shooting with Multi-motion image.

Basic Multi-motion image Procedure

1.Press [BS] and then select “Multi-motion Image”.

2.Hold down the shutter button to record.

3.Release the shutter button.

Continuous Shutter shooting will stop and the resulting composite image will appear on the monitor screen.

•The above procedure shoots multiple images and combines them automatically into a final image. Do not move the camera until shooting is complete.

•You can configure the maximum number of CS shots, the CS fps, and Prerecord CS shots settings the same way as you configure the High Speed CS setting (page 51). Note, however, that the maximum number of CS shots for “Multi-motion Image” is 28 instead of 30.

72

Using BEST SHOT