OTHER RECORDING FUNCTIONS
4.Use [] and [] to select the contour candidate you want to correct.
5.Use [] and [] to select “Trim”, and then press [SET].
•This displays a cropping boundary on the monitor screen.
•If you do not want to crop the image, select “Cancel” to store the image.
6.Use the zoom controller to make the cropping boundary larger or smaller.
7.Use [], [], [], and [] to move the cropping boundary to the location you want, and then press [SET].
•The camera will restore color automatically and save the image.
•If you do not want a border around the image, configure the cropping boundary so it is slightly inside of the boundary of the displayed image.
•To cancel the cropping operation at any point and save the image
115