USING THE CAMERA WITH A COMPUTER
Playing a Movie
In order to play a movie recorded with this camera on your PC using Windows Media Player, you need to install
■To install the codec on a PC that can connect to the Internet
1.Connect the PC to the Internet.
2.Click the movie file that was recorded with the camera.
3.If your PC does not have
4.Install the downloaded
5.This will cause the movie file recorded with the camera to start playing.
NOTE
•If your PC already has
•Note the following important precautions when playing back a movie using Windows Media Player 9.
—When using a
—When using an SD memory card that is not a
Change Windows Media Player settings as shown below. These settings will enable more stable
movie display.
1.On the Windows Media Player [Tools] menu, select [Options]. On the dialog box that appears, open the [Performance] tab.
2.In the “Video acceleration” area click [Advanced].
3.In the “Video acceleration” area, clear the “Use video mixing renderer” check box.
4.In the “Legacy video renderer” area, clear the “Use YUV Flipping” check box.
•Be sure to move the movie data to the hard disk of your PC before trying to play it. Proper movie playback may not be possible for data accessed over a network, from a memory card, etc.
247