PRINTING IMAGES
To configure print settings for all images
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “DPOF”, and then press [].
3.Use [] and [] to select “All images”, and then press [].
4.Use [] and [] to specify the number of copies.
•You can specify up to 99 for the number of copies. Specify 00 if you do not want to have the image printed.
5.To turn on date stamping for the prints, press [DISP] so “On” is displayed.
•“On” indicates that date stamping is turned on.
•Turning on date stamping while “00” is specified for the number of copies will cause the number of copies to change to “01”. Any other number of copies setting will remain the same when you turn on date stamping.
•To turn off date stamping for the prints, press [DISP] so “Off” is displayed.
6.After all the settings are the way you want, press [SET] to apply them.
IMPORTANT! 
•DPOF settings are not cleared automatically after printing is complete. This means that if you perform another printing operation without clearing DPOF settings, printing will be performed in accordance with the last settings you configured. If you want to prevent this from happening, perform the procedure under “To configure print settings for all images” and change the number of copies to “00”. After that, you can configure new DPOF settings as required.
213