OTHER RECORDING FUNCTIONS

Creating Your Own MOVIE BEST SHOT Setup

You can use the procedure below to save the setup of a movie you recorded as a MOVIE BEST SHOT scene. After that, you can recall the setup whenever you want to use it.

1.In a REC mode, align the mode dial with “ ”, and then press [SET].

2.Use [￿], [￿], [￿], and [￿] to display “Register

User Scene”, and then press [SET].

3.Use [￿] and [￿] to display the movie whose setup you want to save.

4.Use [￿] and [￿] to select “Save”, and then press [SET].

•The normal MOVIE BEST SHOT screen will reappear after the save operation is complete. Now you can use the procedure on page 123 to select your user setup for recording.

IMPORTANT!

•When selecting a user setup, scroll to the end of the built-in MOVIE BEST SHOT scenes until “Recall User Scene” appears on the display. Then scroll further to see the user setup scenes.

•Formatting the camera’s built-in memory (page 202) deletes all user MOVIE BEST SHOT setups.

•The following are the settings that are included in a MOVIE BEST SHOT user setup.

Focus mode, white balance mode, sharpness, saturation, contrast, EV shift

•Only the setup of a movie recorded with this camera can be saved as a MOVIE BEST SHOT setup.

•You can register up to 999 MOVIE BEST SHOT user setups.

•You can check the settings of the currently selected MOVIE BEST SHOT scene by displaying the various setting menus.

•MOVIE BEST SHOT user setups are stored in camera built-in memory in the folder named “MSCENE”. File names are assigned automatically using the format shown below.

UZ850nnn.JPE (n = 0 to 9)

125