OTHER SETTINGS

Formatting Built-in Memory

Formatting built-in memory deletes any data stored in it.

IMPORTANT!

•Note that data deleted by a format operation cannot be recovered. Check to make sure you do not need any of the data in memory before you format it.

•Formatting built-in memory deletes the following.

—Protected images

—FAVORITE folder images

—BEST SHOT mode user setups

—Startup screen image

•Before starting the format operation, check to make sure that the camera’s battery is not low. Battery power going low during formatting can cause improper formatting and creates the risk of camera malfunction.

•Never open the battery cover while the format operation is being performed. Doing so creates the risk of camera malfunction.

1.Check to make sure there is no memory card loaded in the camera.

•If there is a memory card loaded in the camera, remove it (page 205).

2.Press [MENU].

3.Select the “Set Up” tab, select “Format”, and then press [￿].

4.Use [￿] and [￿] to select “Format”, and then press [SET]. Entering the PLAY mode after formatting built-in memory will cause the message “There are no files.” to appear.

•To exit the format operation without formatting, select “Cancel”.

202