OTHER RECORDING FUNCTIONS
Instant Movie Setups
(MOVIE BEST SHOT Mode)
Simply select one of a collection of
1.In a REC mode, align the mode dial with “ 
”, and then press [SET].
•This enters the MOVIE BEST SHOT mode and displays a sample scene selection screen. A selection boundary is located at the scene you last used.
•Sample scenes are arranged in sequence, starting from the upper left corner.
•The currently selected sample scene is the one with the selection boundary around it.
2.Use [], [], [], and [] to select the sample scene you want, and then press [SET].
•If there are more than 12 scenes (because you have
added some custom scenes), the screen will scroll to show the remaining scenes when you press [], [], [], and [] while the selection boundary is located at the left or right edge of the screen.
3.Point the camera at the subject and then press the shutter button.
4.To stop movie recording, press the shutter button again.
IMPORTANT! 
•MOVIE BEST SHOT scenes were not recorded using this camera. They are provided as samples only.
•Images recorded using a MOVIE BEST SHOT scene may not produce the results you expected due to shooting conditions and other factors.
•You can change the camera settings that are made when you select a MOVIE BEST SHOT scene. Note, however, that the MOVIE BEST SHOT settings revert to their defaults when you select another MOVIE BEST SHOT scene, change the recording mode, or turn off the camera. If you want to save your settings for later use, save them as a MOVIE BEST SHOT user setup.
•Selecting “Night Scene” reduces the frame rate of movie recording (page 120).
123