OTHER RECORDING FUNCTIONS
Date Stamping Snapshots
You can have the snapshot’s recording date only, or date and time stamped in the lower right corner of the image.
1.In a REC mode, press [MENU].
2.Select the “Set Up” tab, select “Timestamp”, and then press [].
3.Use [] and [] to select the setting you want, and then press [SET].
Example: December 24, 2006, 1:25 p.m.
To include this date stamp information: | Select this setting: | |
|
| |
Recording date (2006/12/24) | Date | |
|
| |
Recording date and time | Date&Time | |
(2006/12/24 1:25pm) | ||
| ||
|
| |
Nothing | Off | |
|
|
IMPORTANT! 
•Once date information is stamped in a print, it cannot be deleted.
•Use the “Date Style” setting (page 195) to specify the format of the date.
•The recording date and time are determined in accordance with the camera’s clock settings (pages 51, 194) when the snapshot is recorded.
•Digital zoom is not supported while date stamping (“Date” or “Date&Time”) is turned on (page 65).
•Date stamping is not supported for the following types of images.
—Images recorded with certain BEST SHOT scenes (“Business Cards and Documents”, “Whiteboard, etc.”, “Old Photo”, “ID Photo”, “Pastel”, “Illustration”, “Cross”)
—Images recorded with the zoom continuous shutter mode and multi continuous shutter mode (pages 100, 101)
| 147 |
| B |
|
|
|
|