PLAYBACK
IMPORTANT! 
•Make sure that “Power On” or “Power On/Off” is selected for the camera’s power on/off functions (page 201) when you connect to a TV to view images.
•All icons and indicators that appear on the monitor screen also appear on the TV screen.
•Note that the audio output is monaural.
•Pressing the USB cradle’s [PHOTO] button will activate the Photo Stand feature (page 174) and display images on the TV screen.
•Depending on the size of the TV screen, recorded images may not fill the entire screen.
•For video output, the audio volume level is initially set to maximum. Perform volume level adjustment using TV controls.
•After using an optionally available AV cable (EMC- 3A) to connect the camera’s USB cradle connector directly to the AUDIO IN terminal of a TV (without using the USB cable), you can view recorded images on the TV and even use the TV screen to compose images before recording them.
Selecting the Video Output System
You can select either NTSC or PAL for the video system to match the system of the TV you are using.
1.In a REC mode or the PLAY mode, press [MENU].
2.Select the “Set Up” tab, select “Video Out”, and then press [].
3.Use [] and [] to select the setting you want, and then press [SET].
If you are using a TV designed | Select this setting: | |
for use in this area: | ||
| ||
|
| |
U.S., Japan, and other areas | NTSC | |
that use the NTSC system | ||
| ||
|
| |
Europe and other areas that | PAL | |
use the PAL system | ||
| ||
|
|
181