AEditing Sample DataReplacing the Data in a Cell1.On the STAT editor screen, move the cursor to the cell you want to edit.2.Input the new data value or expression, and then press

E.

Important!

Note that you must totally replace the existing data of the cell with new input. You cannot edit parts of the existing data.

Deleting a Line1.On the STAT editor screen, move the cursor to the line you want to delete.2.YInserting a Line

1.On the STAT editor screen, move the cursor to the line that will be under the line you will insert.

2.17(S-MENU)3(Edit)3.1(Ins)

Important!

Note that the insert operation will not work if the maximum number of lines allowed for the STAT editor screen are already used.

Deleting All STAT Editor Contents1.1a(S-MENU)3(Edit)2.2(Del-A)This clears all of the sample data on the STAT editor screen.

Note

Note that you can perform the procedures under “Inserting a Line” and “Deleting All STAT Editor Contents” only when the STAT editor screen is on the display.

kSTAT Calculation Screen

The STAT calculation screen is for performing statistical calculations with the data you input with the STAT editor screen. Pressing the Akey while the STAT editor screen is displayed switches to the STAT calculation screen.

E-111