Example 3: To calculate the sales quantity (QTY) from variable cost and unit variable cost

1.Input the required values from among 4, 5, and 6in the Setting Values table (page E-91).

• In this example, use fc to select 4“VC”, input 15000, and then press E.

Use fcto select 5“VCU”, input 30, and then press

E.

2.Select the value you want to calculate.

• In this example, use fc to select 6“QTY”.

3. Press lto perform the calculation.

The result of a 6“QTY” (sales quantity) calculation is also assigned to variable 3“QTY”.

Example 4: To calculate the variable cost (VC) and unit variable cost (VCU)

Use the same procedure as Example 3, substituting the required values.

AQTY CONV. Sub-mode Financial Calculation Variables (VARS)

Variables SAL, PRC, QTY, VC, and VCU are used in the QTY CONV. sub-mode.

QTY CONV. sub-mode variable contents are cleared whenever you change to another mode other than the BEVN Mode sub-modes (BEV, MOS, DOL, DFL, DCL, QTY CONV.).

E-92