ABasic DCL Sub-mode ProcedureExample 1: To calculate the degree of combined leverage (DCL)1.Input the required values from the Setting Values table (page E-88).

• For this example, use fc to select 1“SAL”, input 1200000, and then press E.

Use fc to select 2“VC”, input 600000, and then press E.

Use fc to select 3“FC”, input 200000, and then press E.

Use fc to select 4“ITR”, input 100000, and then press E.

2.Select the value you want to calculate.

• For this example, use fc to select 5“DCL”.

3. Press l to perform the calculation.

AOther DCL Sub-mode Calculations

Example 2: To calculate the sales amount (SAL), variable cost (VC), fixed cost (FC), and interest (ITR)

Use the basic procedure (Example 1), substituting the required values.

ADCL Sub-mode Financial Calculation Variables (VARS)Variables SAL, VC, FC, ITR, and DCL are used in the DCL sub-mode.

DCL sub-mode variable contents are cleared whenever you change to another mode other than the BEVN Mode sub-modes (BEV, MOS, DOL, DFL, DCL, QTY CONV.).

E-89