#Norm: All modes

This setting specifies the range that determines when display of values switches to exponential format.

Changing this setting automatically cancels any previous settings made for !Fix and @Sci.

Norm1: 10–2> x, x >1010Norm2: 10–9> x, x >1010Example: 1 200 = 5 10–3(Norm1)=0.005 (Norm2)1. Use fcto select “Norm”, and then press E.2. Press 1(Norm1) or 2(Norm2).$ STAT: Statistics (STAT) Mode, Cash Flow (CASH) Mode

This setting controls whether a frequency (FREQ) column is included in the STAT Mode DataEditor.

The Cash Flow (CASH) Mode uses the same DataEditor as the STAT Mode. Turning on display of the frequency column reduces the maximum number of data items that can be input for investment appraisal.

1:On

Frequency (FREQ) column display on

2:Off

Frequency (FREQ) column display off

1. Use fcto select “STAT”, and then press E.2.Press 1(1:On) or 2(2:Off) to select the setting you want.

You can also use fcto select a setting and then press E.

Important!

This operation clears DataEditor data. Note that data is cleared even if you select the setting that corresponds to the current FREQ column display status. Selecting “On” while FREQ column display is currently turned on, for example, will clear DataEditor data.

E-21