*2 • You must input two digits for the month and day. This means you should include a leading zero for values from 1 through 9 (01, 02, 03... etc.).

You can specify either month, day, year (MDY) or day, month, year (DMY) as the date input format. See the “Date Input” setting under “Configuring Settings” (page E-16).

Note

After specifying the 1 Days in Year (Date Mode) in the Day Calculation Mode, you can calculate any one of the following three values by inputting values for the other two: 2 Starting Date (d1), 3 Ending Date (d2), and 4 Number of Days (Dys).

ABasic DAYS Mode Procedure

Example 1: To calculate the number of days between two dates

1.Input the required values from the Setting Values table (page E-64).

• For this example, use fcto select 1“Set:”, and then press E.

• Press 2to select “365”.

• Use fcto select 2 “d1”, input 11052004, and then press E.

Use fcto select 3“d2”, input 04272005, and then press E.

2.Select the value you want to calculate.

• For this example, use fcto select “Dys”.

3. Press lto perform the calculation.

E-65