
Selecting and Playing a Tone
Using the Metronome
1.Press the
•This will start the metronome.
•The display will show the tempo along with a count of the measures and beats since you started the metronome.
TempoBeat
Measure
2.Press the
To change the beats per measure
1.Hold down the
2.Use the dial or
•You can select 0, or a value within the range of 2 to 6. Specifying 0 for this setting will cause each beat to be indicated by the same sound (no chime at the beginning of each measure).
3.Press the
•This exits the metronome beat screen.
To change the tempo setting
There are two different methods you can use to change the tempo setting: using the TEMPO buttons or tapping a beat with a button.
■To change the tempo using the TEMPO buttons
1.Press the
•This displays the tempo screen shown below.
•If you do not perform any operation for a few seconds, the display will return to previous screen automatically.
2.Use the
•Holding down either button will scroll the setting values at high speed.
•You can specify a tempo value in the range of 30 to 255.
3.Press the
•This exits the tempo screen.