Using the Tone Editor

Parameter Name

Description

Setting Range

DSP On Off

Specifies whether DSP should be applied (on) or not applied (oFF) to notes.

oFF*, on

(DSP On/Off)

The following four settings become enabled when “on” is selected for this

 

 

setting.

 

 

 

 

DSP

Specifies the DSP to be applied to tones using DSP numbers (001 to 100:

ton*, 001 - 200

 

Preset DSPs; 101 to 200: User DSPs). Selecting “ton” applies the initial preset

 

 

DSP of each tone.

 

 

 

 

DSP Type

Shows the DSP type number corresponding to the above DSP value that is set

01 - 46*1

(DSP Type)

automatically as the initial default setting.*1 You can modify the initial default

 

 

setting and select a different DSP type.

 

 

 

 

DSP Parameters 1

Shows up to eight parameters for “DSP Type”. *2

*2

through 8

 

 

 

 

 

DSP RevSend

Adjusts how much reverb is applied to the post-DSP note.

0 - 40* - 127

(DSP Reverb Send)

 

 

 

 

 

*1 See “Preset DSP List” (page E-119) for information about the DSP types of each preset DSP.

*2 The number of DSP parameters, their content, and their setting ranges depend on the DSP type. For details, see “DSP Type List” (page E-120) and “DSP Parameter List” (page E-121).

E-49