Casio WK6500E1B Playing a Recorded Song

				Using the Song Sequencer
5. Use the R-17 (y) button to move the 0 to		4. Press the L-17 (START/STOP) button.
	“PanelRecord”.	•	This starts playback. The following operations are
			supported during playback.
		To do this:		Do this:
		Skip Forward		Hold down the L-15 (dFF) button.
		Skip Back		Hold down the L-14 (sREW) button.
		Pause		Press the L-16 (PAUSE) button.
		Restart paused		Press the L-16 (PAUSE) button.
		playback
6. Press the R-16 (ENTER) button.		Perform repeat		Perform steps 4 through 6 under “To
		playback		repeat play a specific section of a
7. In response to the “Sure?” message that				song” (page E-110).
		•	Even while playback is paused, you can still perform
	appears, press the R-14 (YES) button to execute
			fast forward playback by holding down the L-15
	the panel record operation or the R-14 (NO)
			(dFF) button or fast backward playback by holding
	button to cancel.		down the L-14 (sREW). Releasing either button goes
			back into pause.
		•	While playback is in progress or playback standby, you
	Playing a Recorded Song
			can use the R-17 (u, i) buttons to select the track
This section explains how to perform the following operations			you want. Playing keyboard keys sounds the parts that
			correspond to the currently selected track (A04 to A07
on songs recorded in the song sequencer mode.
			for the system track).
•	Play a song.
		•	Playback stops automatically when it reaches the end
•	Fast forward, fast backward, pause, unpause.
			of a song. To stop playback part way through, press the
•	Play a specific part in a song.
			L-17 (START/STOP) button.

•Repeat play a specific section of a song.

•Assign a name to a song.

•Delete a song.

To play a recorded song

1.Press the C-3 (SONG SEQUENCER) button to enter the song sequencer mode.

2.Use the dial or R-14 (–, +) buttons to select a song area number.

3.Configure mixer settings, tempo, and other panel settings you want to use for playback.

•To change the system track UPPER 1, UPPER 2, and LOWER part tones or mixer settings, use the mixer to change the settings of parts A05 (UPPER 1), A06 (UPPER 2), and A07 (LOWER).

•The above settings are not required if you want to play the song as it was recorded.

E-73