Using the Song Sequencer

 

To adjust the velocity value of a note event

 

6. Press the R-16 (ENTER) button.

 

 

 

 

 

•

This will display the setting screen like the one shown

 

 

 

 

 

1. Display the event editor screen of the track you

 

 

below.

 

 

 

want to edit.

 

 

 

 

 

 

 

 

• See “To select a track for editing” (page E-85).

 

 

 

 

 

2. Depending on the type of adjustment you want

 

 

 

 

 

 

make, perform one of the operations below.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To adjust this:

 

Do this:

 

 

 

 

 

 

Individual note event

On the event editor screen,

 

 

 

 

 

 

 

move the cursor to the note

 

 

 

 

 

 

 

event you want to adjust and

 

•

The following explains the meanings and setting ranges

 

 

then advance to step 3.

 

 

 

 

 

of the on-screen items. The settings marked with an

 

 

 

 

 

 

 

All note events in a track

Advance to step 3.

 

 

asterisk (*) in the “Setting Range” column are initial

 

 

 

 

 

 

defaults.

 

 

 

Note events within a

Advance to step 3.

 

 

 

 

 

 

 

 

 

 

 

specific range in a track

 

 

 

Item name

Description

Setting Range

 

 

 

 

 

Fix

 

Specifies a fixed value as the

oFF*, 001 to 127

3. While holding down the R-13 (FUNCTION)

 

 

 

(Fixed value)

velocity value.

 

 

button, press the C-13 (MENU) button to display

 

 

 

Select “oFF” for this setting to

 

 

 

 

 

adjust based on the current

 

 

the event editor menu.

 

 

 

velocity value of each note

 

 

 

 

 

 

 

 

event.

 

4. Use the R-17 (t, y) button to move the 0to

 

 

 

 

 

 

Rate

 

These settings are enabled

000% to 100%* to

 

“VelocityMod.” and then press the R-16

 

(Velocity Rate)

only when the “oFF” is

200%

 

 

 

 

selected for the “Fix” setting.

 

 

(ENTER) button.

 

 

 

 

 

 

 

 

 

 

 

 

They change the velocity

 

 

• This displays the “Velocity Modify” screen.

 

 

 

value of each note event

 

 

 

 

 

according to the mathematical

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

expression (decimal parts cut

 

 

 

 

 

 

Offset

 

off) shown below. 1 is used

–126 to 000* to

 

 

 

 

 

(Velocity Offset)

when the value produced by

+126

 

 

 

 

 

 

 

the expression is less than 1,

 

 

 

 

 

 

 

 

and 127 is used when it is

 

 

 

 

 

 

 

 

greater than 127.

 

 

 

 

 

 

 

 

(Current velocity) X (Rate

 

 

 

 

 

 

 

 

setting) + (Offset setting)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7. To change the setting to the desired value,

 

 

 

 

 

press the R-16 (ENTER) button.

 

5. Use the dial or R-14 (–, +) buttons to change the

 

8. In response to the “Sure?” message that

 

mode indicated in the thick brackets (%).

 

 

 

appears, press the R-14 (YES) button to execute

 

 

 

 

 

 

To adjust this:

 

Select this mode:

 

the adjustment or the R-14 (NO) button to

 

Individual note event

 

Cursor

 

cancel.

 

 

 

 

 

 

 

 

 

 

 

 

All note events in a track

 

All

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note events within a specific range

Locator

 

 

 

 

 

 

in a track

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•While the “Locator” mode is selected, use the R-17 (u, i) buttons, the dial, or the R-14(–, +) buttons to specify the range whose note event velocity value you want to adjust.

E-92