Using the Tone Editor

• Cutoff Frequency

Creating a User Tone

The cutoff frequency is a parameter for adjusting timbre by

cutting any frequency that is higher than a specific frequency.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A larger cutoff frequency produces a brighter (harder) timbre,

 

User Tone Numbers

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

while a smaller frequency produces a darker (softer) timbre.

 

 

 

 

 

 

 

 

 

 

 

 

 

Level

Tone areas numbered L:001 through L:010 are for storage of

 

 

 

 

 

 

user tones. You can have up to 10 user tones stored in

 

 

 

 

 

 

memory at one time. You can recall a stored user tone by

 

 

 

 

 

 

pressing the R-12 ([L] USER TONES) button. See “To select

 

 

 

 

 

 

a tone” (page E-14).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To create and save a user tone

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Frequency

1. Select the tone you want to edit in order to

 

 

 

 

 

Cutoff frequency

create your user tone.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Press the C-6 (TONE EDITOR) button.

(3) Tone Pitch Parameters

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Vibrato Type, Vibrato Delay, Vibrato Rate, Vibrato

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Depth

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

These parameters adjust the vibrato effect, which causes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

periodic changes in the tone.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Octave Shift

• This displays the tone editor screen.

This parameter controls the octave of all tones.

 

 

 

 

Total number of pages

 

 

 

 

 

 

 

 

 

 

(4) Tone Characteristic Setting Parameters

 

 

 

 

 

 

 

 

 

 

 

 

 

Currently displayed page

 

 

 

 

• Volume

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This parameter controls the overall volume of the tone.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Touch Sense

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This parameter controls changes in volume and timbre in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

accordance with the relative amount of pressure applied to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the keyboard keys. You can specify more volume for stronger

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

pressure and less volume or a lighter pressure, or you can

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

specify the same volume regardless of how much pressure is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

applied to the keys.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Reverb Send, Chorus Send, DSP Line , DSP Type, DSP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Parameter name

 

 

Current setting

 

Parameters

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Currently selected parameter

These parameters control the effects applied to tones.

 

 

 

 

 

 

 

(Enclosed by thick brackets %).

 

 

 

 

 

 

 

 

 

• You can use the R-17 (u, i) buttons to scroll between pages.

3. Use the R-17 (t, y) buttons to move the thick

brackets (%) to the parameter you want to change.

• For information about the operation and the setting range of each parameter, see “Tone Parameter Settings” (page E-48).

4. Use the dial or R-14 (–, +) buttons to change the setting value.

• Pressing the R-14(–, +) buttons at the same time returns a parameter to its initial default setting.

5. Repeat steps 3 and 4 as required to configure other parameters.

E-46