Applying Effects to a Sound

To use a DSP

6. Press the C-5 (EFFECT) button or the R-15

 

(EXIT) button.

1. While holding down the R-13 (FUNCTION)

 

 

• This exits the effect setting screen.

button, press the C-5 (EFFECT) button to

 

 

display the effect setting screen.

 

 

 

•

A pointer indicator is displayed next to DSP when “DSP” is

 

 

selected for the “Chorus/DSP” setting.

 

• You also can adjust how a DSP is applied (DSP output

 

 

enabled/disabled, DSP output volume, DSP output pan,

 

 

etc.) For details, see “Using the Mixer” (page E-39).

•Check to make sure that the “DSP Disable” setting is “oFF”. If it is “on”, change it to “oFF”.

2.Use the R-17 (t, y) buttons to move the thick brackets (%) to “Chorus/DSP”.

3.Use the R-14 (–, +) buttons to select “DSP”.

4.Use the R-17 (t, y) buttons to move the thick brackets (%) to the “DSP” setting.

•This causes the number and name of the currently selected preset DSP to appear within the thick brackets (%) on the display.

5.Use the dial or R-14 (–, +) buttons to select the preset DSP you want to use.

•DSPs with the leading numbers 001 through 100 (and “ton”) are preset DSPs. See “Preset DSP List” on page E-119 for information about preset DSP numbers and names.

•DSP types with the leading numbers 101 through 200 are user DSPs. For details, see “Creating a User DSP” (page E-37).

E-36